Compu Pool CPSC-36 Replacement Cell - Titanium Electrolytic Salt Cell for Saltwater Chlorine Generators

The CPSC-36 is the perfect replacement for cells from Compu Pool CPSC36 and CPA salt pool systems. This cell was designed to meet or exceed original specifications with improved manufacturing (NOT made by Compu Pool), to ensure optimal performance and reliability.

Q: Power and polarity lights are lit. Salt level is good by independent analysis and water flow is good. No Flow light stays lit and therefore cell will not generate chlorine. Is the flow sensor/switch integral to the replacement cell or is it a different assembly?

Asked by: Swiss Expat - 7/19/2017

A: There isn't an actual flow switch on this model, it just takes electrical readings from the cell to determine salinity or the presence of water. If your salt level is actually above 3000, if the cell is clean, if water is completely filling the cell, and if the cord is getting tight clean connections on the three terminals at the end of the cell, then most likely the cell itself (the titanium electrodes) just needs to be replaced.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Discount Salt Pool (7/20/2017)

Submit an answer

Q: Can you provide the O-ring to put it into the clear housing?

Asked by: Jill - 7/24/2017

A: Yes, that O-Ring comes with this cell. Additionally, if you want to get the o-rings for that system separately, you can find them here:
https://www.discountsaltpool.com/CircuPool-RJ-Classic-O-Ring-Set_p_34.html

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Discount Salt Pool (7/25/2017)

Submit an answer

Q: Are these made by Compu Pool in Australia?

Asked by: allan - 4/13/2018

A: These are improved models made for use with Compu Pool systems, and are not from Australia or made by Compu Pool.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Bob (4/16/2018)

Submit an answer

Q: Will this work with the 24 k gallon generator ?

Asked by: Eric Strong - 3/22/2019

A: No, the control module you have with a cpsc24 has a transformer which is too small to power a larger size cell. if you are looking to upgrade, give us a call and we can get you a discount on a more powerful system that will be a drop-in replacement. That is a better value. 866-766-5243

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Discount Salt Pool (3/22/2019)

Submit an answer

Questions? Ask here

Your Salt Pool System Experts

Low prices + Fast Shipping on top [categoryname]Pool EquipmentChlorine GeneratorsSalt CellsOzone GeneratorsSalt SystemsPool [categoryname][categoryname] Parts
Have questions? Don't hesitate, contact us!

Replacement cell for CompuPool CPSC 36

Rating Snapshot

Average Customer Ratings

Q: Power and polarity lights are lit. Salt level is good by independent analysis and water flow is good. No Flow light stays lit and therefore cell will not generate chlorine. Is the flow sensor/switch integral to the replacement cell or is it a different assembly?

Q: Can you provide the O-ring to put it into the clear housing?

Q: Are these made by Compu Pool in Australia?

Q: Will this work with the 24 k gallon generator ?

Customers who viewed this item also bought

Related Items

Recently Viewed Items

Browse Similar Items

Mailing List