SALE: Upgrade to next larger size for $10 - Year End Event
  1. Home
  2. Parts
  3. CompuPool Clear Housing Fits All CPSC
Sale
CompuPool Clear Housing Fits All CPSC
CompuPool Clear Housing Fits All CPSC

CompuPool Clear Housing Fits All CPSC

Part Number: CMHS
Availability: In Stock.
Estimated Delivery Times
14
$98.00
Save:$20.00(20%)
$78.00
0 Add to Cart
Begin Checkout
Compu Pool clear internal housing for all CPSC / CPA models
Warranty 1 Year Limited
This replacement clear cell housing replaces the original Compu Pool electrode housing body with part number JD363102Z. This part is the housing for all CPSC Series and older CPA cell electrodes. This internal electrode housing holds the CPSC-16, CPSC-24, CPSC-36, or CPSC-48 salt cell, and is easily replaceable if cracked, leaking, or damaged. The plastic housing is not made by Compu Pool, and is made to meet or exceed original Compu Pool factory specs to help ensure cracks or leaks don't occur.

Rating Snapshot

Select a row below to filter reviews.

5 Stars
11
4 Stars
3
3 Stars
0
2 Stars
0
1 Stars
0

Average Customer Ratings

4.8

View All Reviews - Reset
finally no cracks
Way better than the original, my compupool cells cracked every six months and they only replaced it for me once for free. This one doesn't have the weird seam that looked like a crack that the original ones had and fit perfect with my existing parts. Running for twice that amount of time with no problems.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from Clearwater, FL on 7/8/2016
5
Replacement housing
Installed easy and fixed the leak, just had to unscrew connectors. Also added new orings.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from birmingham, al on 9/6/2016
5
fit fine and good so far
fit fine and good so far. why does a piece of plastic cost so much? one star off.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from Gainesville, FL on 12/2/2016
4
Fits Great
Perfect replacement for my old, cracked and leaking cell housing.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from Port Orange on 5/2/2017
5
leak
had a leak, and this fixed the prob. So glad they were in stock.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from Chester, VA on 4/13/2018
4
Load More
There are no reviews yet
Questions From Customers
Ask A Question

Q: I have a CPSC36 unit, it has cracks all in it. Will the clear replacement fit my unit?

Asked by: Lou - 7/25/2017
A: Yes, this item is made to be a direct replacement.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Sharon (7/31/2017)
Submit an answer

Q: will this fit circupool sj40?

Asked by: jeff - 10/31/2017
A: No, for the SJ models, you would want to see the SJ housing:

https://www.discountsaltpool.com/CircuPool-Clear-Housing-for-SJ-Series_p_244.html
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (10/31/2017)
Submit an answer

Q: Have a cracked CPSC36 housing, how do I replace the housing? Meaning separate it from the cell units. thanks

Asked by: Timothy J Gallagher - 6/9/2020
A: There will be 3 threaded collars on your housing that you will unscrew, and that will let you remove your existing clear housing.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: David (6/10/2020)
Submit an answer

Q: can i use a cpsc24 salt cell on a cpsc16 system thanks

Asked by: Steven Willson - 1/23/2024
A: Selecting a new Cell Size (“Cell Amp” Setting)
When upgrading or changing what size cell you are using, you simply need to make a corresponding
change to your Control Module’s settings.
Step 1- While the Control Module is turned on and running like normal, cut input power to the unit (ex:
using the breaker switch or the pump timer switch). The Control Module should go dark.
Step 2- Firmly hold in both the Superchlor (SUPER CL) and the Winter Mode (SNOWFLAKE) buttons
down while the unit is still dark. Restore power to the unit while continuing to firmly hold down the two
buttons (you may wish to get a second person’s help depending on the layout of your pool equipment).
All lights on the keypad will be illuminated while you hold the buttons in. Keep holding both buttons in
continuously for 10 seconds after restoring power, then release. The LED lights will go out, and
“Maintenance Menu” will appear on the screen.
Step 3- A variety of options will appear in the Maintenance Menu; be sure not to make any inadvertent
changes. Press the Select (OK) button to move through the settings to reach the screen that will display
“Load #A”. Using the arrow buttons (not the chlorine output buttons), adjust the Cell Amp setting
accordingly to match your new cell:
IMPORTANT NOTE: Control Modules have 2 specifically sized internal power
supplies ("small" & "large"), allowing small models to only support 4 & 5 plate
cells and large models support only 7 & 10 plate cells.
15A Setting – for models with 4 Titanium Plates – ex: CPSC16
20A Setting – for models with 5 Titanium Plates – ex: CPSC24
30A Setting – for models with 7 Titanium Plates – ex: CPSC36
40A Setting – for models with 10 Titanium Plates – ex: CPSC48
Step 4- After selecting the correct setting, press the Select (OK) button until the message, “TURN MAIN
SWTICH OFF THE ON” appears.
Step 5- Cut input power to the unit again, then restore power to resume normal operation. The system
will have saved your new Cell Size setting and will now work optimally with your new Cell.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Steve (1/23/2024)
Submit an answer

Q: Does the 3 collars for installation of this housing come with it? Or are they available? I'm more comfortable replacing my housing along with new collars. as the cell collar has blown off. the other two must be as fatigued. Input and output collars.

Asked by: James - 7/11/2024
A: You can use these collars in addition to the housing:


https://www.discountsaltpool.com/circupool-threaded-cell-collar-rj-classic-large


https://www.discountsaltpool.com/circupool-threaded-cell-collar-rj-classic-small
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Peter (7/12/2024)
Submit an answer
Questions? Ask here

Features

  • Improved materials and manufacturing - not manufactured by Compu Pool.
  • Threaded connections, no cutting or gluing required.
  • Fits: CPSC-16, CPSC-24, CPSC-36, and CPSC-48 systems.
Manufacturer 1 Year Limited Warranty for residential use. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
About / Contact Us
DSP is the largest specialty provider of saltwater swimming pool equipment.
Get Product Support
Directory for product support for popular items.
Get Expert Help
Customer Care: 866-766-5243
Live Help: Chat
Customer Reviews