The T-Cell-9 Turbo cell is an eco-friendly and cost-effective way to sanitize your swimming pool and also helps provide a luxurious swimming experience without eye irritation and dry skin. The T-Cell-9 Turbo Cell replacement is compatible with the full line of salt pool systems from Hayward, such as:
- Goldline Aqua Rite
- AquaRite Pro
- AquaLogic
- Pro Logic
- SwimPure
- Mineral Springs
- NatureSoft
- SplashCLEAR
- AquaPlus
- LeverEdge Guardian
- Blue Essence
- H25 systems
- And more
If you’re in need of replacing your Hayward T-Cell-9 Turbo cell, this factory original replacement will allow your salt cell to resume proper chlorination again if your old T-Cell-9 Turbo Cell has been depleted. This T-Cell-9 Turbo Cell for Hayward is designed to be easily dropped in place and allow you to replace your old Hayward T-Cell-9 Turbo Cell in just mere minutes!
This factory original T-Cell-9 Turbo Cell for Hayward is 100% guaranteed compatible and meets or exceeds factory specs.
Sizing:
If you’re already in the process of replacing your Hayward T-Cell-9 Turbo Cell, take this opportunity to make sure it is sized correctly.
Having the right size salt cell for your pool is one of the most crucial things you need to know when purchasing your salt cell. Failure to get the right size salt cell can lead to having to purchase additional chlorine or shock for your pool, costing more time and effort. With a properly sized salt cell, you can even extend the lifespan of your cell!
The industry recommends using a salt cell with a maximum capacity of 1.5-2 times the actual size of your pool, but keep in mind it’s wise to oversize. The Hayward T-Cell-9 Turbo Cell is manufacturer rated for a maximum capacity of 25,000 gallons.
Compatibility:
The Hayward T-Cell-9 Turbo Cell is 100% compatible with original systems, with no software/hardware issues. The T-9 Turbo Cell for Hayward has the same length, threading, and cable connection for direct replacement.
To get the most life out of your salt cell and to keep your pool running without unexpected interruptions:
- Make sure it is sized correctly
- Maintain correct water balance
- Be sure to inspect your cell at least every 3 months for leaks, debris & calcium scale
- Follow instructions in the product manual & clean the cell as often as instructed
General FAQ
If your salt cell needs to be replaced, you probably have a problem with low chlorine, but if your chlorine level is a problem then the cell is only one of several possible issues, notably including excessive chlorine demand. Essentially, you have either a system problem or a water problem.
System problems will generally reveal themselves with error messages or warning lights on the control module. The typical indications of the cell needing replacement will be one or both of the following: Low Salt warnings that are present with correct salinity and Check/Clean Cell warnings that display when the cell is verifiably clean.
If you are referring to buying the same brand, there’s no question that the original OEM salt cell is exactly what your system was designed to use. However, commonly there are aftermarket replacement cells available which fit into place and operate quite satisfactorily. It is your prerogative to employ one of these aftermarket replacements if you are satisfied with the specifications, price warranty, and reported compatibility.
If you were asking about buying the same capacity cell, then OEM or aftermarket alike, you need to first determine whether your control or power module can accommodate a different size. Assuming you can change sizes, a larger cell is virtually always a good choice. However, in downsizing, make sure the smaller cell is still sufficiently large to maintain 1.5-2 times sizing of the cell relative to the pool’s volume.
There are no reviews yet
Questions From Customers
Q:
Does it included the power cord and 2 unions as pictured?
Asked by: Chris
- 4/27/2017
1
Q:
can this compatible to use with a Hayward Blue Essence=20 system?
Asked by: Ruth
- 2/9/2019
1
Q:
I need to replace my T 9 Goldline cell is this the same cell? It is listed as part number T15
Asked by: Tony
- 7/4/2017
1
Q:
1 have a 15000 pool with a t-15. I want to change to the t cell 9 ?
Asked by: chief
- 7/11/2018
1
Q:
does the AquaRite need to be re calibrated ?
Asked by: Robert
- 7/12/2018
1
Q:
Does this model salt cell have a connection cord Hayward T9 ?The picture does not show a cord.
Asked by: John
- 5/27/2019
1
Q:
is this the exact replacement for a hayward turbo cell GLX-9-w?
Asked by: Paul
- 11/29/2019
1
7
|
Chlorine Output
|
0.9 lbs /day
|
|
Manufacturer Max Capacity
|
25,000 gallons
|
|
Manufacturer Warranty
|
3 Year
|
|
Warranty Penalty for Self-Install
|
No
|
|
Salinity Range:
|
2700-3400 ppm
|
|
Self-Cleaning:
|
Yes, Reverse Polarity
|
|
Clear Cell:
|
No
|
|
Number of titanium blades:
|
13
|
|
Flow switch included:
|
No
|
|
O-Ring included:
|
No
|
|
Unions Included:
|
No
|
|
Cell cord length:
|
15’
|
|
Cable Connection Type:
|
Plugin
|
|
Weight:
|
3.4 lbs
|
|
Weather / UV-Resistance:
|
Designed for Outdoor Installation and Operation
|
The Hayward Aqua Rite TurboCell is an inline opaque-plastic housing which contains built-in titanium electrode plates and built-in power supply cord. The AquaRite salt cell has threaded connections on the inlet and outlet, which allow quick access for service or winter removal (if applicable). The threaded connections attach to 2" unions which are glued to the existing return-line PVC plumbing.
Manufacturer 3 Year Limited Warranty for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
