Sale
Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)
Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Part Number: SGSB320-RC
Availability: This Item Is No Longer Available
7
$703.70
Save:$249.70(35%)
$454.00
Genuine OEM 3-Blade Replacement Salt Cell for the Saline Generating Systems Breeze 320 (now CMP) salt chlorine generator. 20,000 gallon max capacity.
Per the Manufacturer, this chlorine generator model line is no longer available due to critical component shortages.
Power 0.7 lbs/day
Rated Lifespan10000 Hours
Max Capacity 20000 Gallons
Warranty1 Year Limited*

The Breeze 320 replacement cell is compatible with Saline Generating Systems Breeze 320 and 3-blade CMP salt chlorine generators The Breeze 320 salt cell is the factory original replacement cell model designed to easily drop in place and allow you to replace your old Breeze 320 cell in minutes. This cell is made to meet or exceed original factory specs and has 100% guaranteed compatibility.

Replacing the Breeze 320 cell will allow your salt chlorine generator to begin chlorinating again if your old Breeze 320 salt cell has been depleted. The Breeze 320 cell sanitizes your swimming pool in an eco-friendly and cost-efficient way, and also helps provide a luxurious swimming experience without the eye irritation and dry skin.

Sizing:

When replacing your Breeze 320 salt cell, take this opportunity to make sure it is sized correctly. Sizing your salt cell properly is key to making sure you will not need to supplement with additional chlorine or shock your pool, and also extends the lifespan of your cell. The industry recommends using a salt cell with a max capacity of 1.5-2 times the actual size of your pool (more is better). The Breeze 320 is manufacturer rated for a maximum capacity of 20,000 gallons.

Compatibility:

This replacement salt cell for the Breeze 320 is 100% compatible with original systems (no software/firmware issues). The Breeze 320 cell has the same length, threading, and cable connection for direct replacement.

To get the most life out of your salt cell and to keep your pool running without unexpected interruptions, make sure it is sized correctly, maintain correct water balance, and be sure and inspect your cell at least every 3 months for leaks, debris, and calcium scale. Be sure to follow instructions in the product manual and clean the cell as often as the system indicates.


Resources


General FAQ

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.6

Works like a champ!
Easy to install. Works as advertised.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Columbia on 5/8/2021
5
Replacement part...no choice
Your service was great, but the part itself is of poor quality and needs to be modified to extend its life from 1.5 yrs to 3 yrs. This is now my 4th generator cell...I purchased the system new in 2015
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from ARIZONA on 4/26/2022
2
Very happy
We received the cell fast and its an exact replacement and only took 2 minutes to replace the old one. Its working perfectly now, we are very happy with it.
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from Wilmington, NC on 7/2/2020
5
Product arrived quickly.
Needed a replacement cell. I found another online store that was cheaper but the store had terrible reviews. I looked at discountsaltpool.com and the reviews were good.
Did you find this helpful? 
Reviewed by:  from Anthem, AZ on 7/6/2023
5
Salt Cell replacement
After purchasing 2 cells from another company that leaked......this one is made so much better and is perfect.....company great to work with very helpful. Highly recommend!!!!
Did you find this helpful? 
Reviewed by:  from Arizona on 8/9/2023
5
There are no reviews yet
Questions From Customers

Q: I have a SGS Control Panel, MET UL1081, E112975. My salt cell is leaking at the screw on cap. What cell would I buy to replace it?

Asked by: Dean - 9/28/2019
A: Those number don't tell the model. If the model number (Breeze 320, 540, 760) isn't marked, you can just count the number of titanium plates: 3 plates will be the Breeze 320 cell (this item you are asking about), 5 plates is the Breeze 540 cell, 7 plates is the Breeze 760 cell.
Was this answer helpful?  6 of 8 Customer(s) found this Answer helpful.
Answer provided by: Nathan (9/30/2019)

Q: Does the generator come with a new seal? If not, what part number should I order.

Asked by: Yanni - 6/23/2019
A: This item does not come with the o-ring. If needed, you can find that part here: https://www.discountsaltpool.com/SGS-Breeze-O-Ring-_p_353.html
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (6/24/2019)

Q: I have a S G 3000 salt chlorine generator that needs a new cell. Is this the correct replacement cell?

Asked by: Sam Barfield - 5/27/2019
A: The newer replacement model for the SG-3000 cell will be the Breeze-540 cell
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/27/2019)

Q: How long is the chord ?

Asked by: Lisa - 7/25/2019
A: It's the factory length cord, right about 10 feet.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Dale (7/25/2019)

Q: I have a SG 3000. The cell is heating up after pump is off causing plastic cover to shrink. Also have an air bubble. Status light is blinking.. What do you suggest? Can not get cell out. Sam Barfield

Asked by: Sam Barfield - 12/25/2019
A: Older models like that can't run without the water flow or it can cause damage as you describe. I'll have support reach out to you to help get you the replacement parts you need or to give you other options for something newer and better (which would also not have that problem in the future) if that is a better value.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (12/30/2019)

Q: I have a Breeze Slat Water Chlorinator.. It was put in about 4 years ago.. The cell kept getting gunked up with a white substanvce and the pool guy said he was cleaning it off every two weeks..doubtful - as since I came back for good it has not happened again..but now, the white cloudy substance (Chlorine) is not coming into the cell although the cell is still vibrating.. Is there a problem solving chart for this? Also, if I need to buy a new cell how do I knwo which one..Thank you for any help Mary

Asked by: Mary - 4/9/2020
A: Typically if the cell is worn out and not working, you'll get the amber service-related warning light and/or the green power light will be flashing. You'll narrow it down to that if you've confirmed there is no debris between the cell plates, your salt level in the water is 4000ppm, and your water temperature is at least in the 60's. Given the age that could be possible.

The clear cell housing is found here: https://www.discountsaltpool.com/Saline-Generating-Systems-Clear-Housing-for-SGS-Breeze-Wave-and-CMP-PowerClean_p_350.html
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/10/2020)

Q: The status light on my Breeze Chlorinator board is flashing green. What does this indicate? Note: i just purchased a replacement cell from you and installed it. thanks

Asked by: Larry Newell - 10/2/2020
A: The SGS troubleshooting guide says to check a few things, such as make sure your water temperature is not cold, make sure water is completely filling the cell during operation, make sure the cell cable's inner prongs are fully extended and getting a 100% tight connection with the controller, as well as checking that the controller's circuit boards are not damaged.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Kyle (10/5/2020)

Q: This looks like my SGS 3000 salt cell element , will it work on my system ?

Asked by: Bill skukowski - 5/2/2020
A: Breeze and SG cells can be interchangeable, but you would want to count how many titanium blades your old system has and make sure you order a new one with the same amount.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Ty (5/5/2020)

Q: Your picture shows 5 plates , is this a correct pic ??

Asked by: Bill - 5/12/2020
A: This is a 3-Blade Replacement Cell for SGS Breeze / CMP PowerClean 20,000 Gallon Salt Systems
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (5/13/2020)

Q: have INTEX pool has a#11374 .titanium electrode.can"t find a replacement.anything compatable.

Asked by: jerry - 8/29/2020
A: Unfortunately nothing is compatible for an Intex replacement cell other than Intex products. If you'd like help upgrading to a newer system with higher specs, we're glad to assist. Just give us a call at 866-766-5243.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (8/31/2020)

Chlorine Output

0.7 lbs /day

Manufacturer Max Capacity

20,000 gallons

Manufacturer Warranty

1 Year Limited*

Warranty Penalty for Self-Install

No 

Salinity Range:

3000+ ppm

Self-Cleaning:

Yes, Reverse Polarity

Clear Cell:

Yes

Number of titanium blades:

3

O-Ring included:

No

Cell cord length:

10’ (Included)

Cable Connection Type:

Plugin

Weight:

3 lbs

Weather / UV-Resistance:

Designed for Outdoor Installation and Operation

The SGS Breeze 320 Electrolytic Cell fits into the existing clear housing and comes with a built-in power supply cord. The Breeze salt cell has a threaded connections on the head of the cell, which allow quick access to the titanium plates for service or winter removal (if applicable).
Manufacturer Limited Warranty (Excerpt):

Custom Molded Products, LLC takes great pride in the quality products that it manufactures. The company maintains high standards for the materials and workmanship that it invests in its products. Accordingly, Custom Molded Products makes this express Limited Warranty with respect to products manufactured solely by Custom Molded Products, LLC, as follows:
 
Custom Molded Products warrants its products to be free of defects in material and workmanship for a period of one (1) year from the date of original purchase of the Custom Molded Products product unless otherwise noted.
 
Exceptions to standard CMP one (1) year warranty:
DEL UV-C 50: 2 year warranty 
UV-C Bulbs for DEL AOP & UV-C 50: 18 months
Powerclean Salt Ultra: 3 year warranty (parts & labor)
Powerclean Salt Ultra Extended Life: 4 year warranty (parts & labor)
Powerclean Salt Econ: 2 year warranty (parts & labor)
Replacement for T-15 Cell: 2 year warranty
 
See manufacturer warranty document for full warranty details.

Most manufacturer chlorine generator warranties are for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.