The APEX S7 aftermarket replacement salt cell is an easy replacement designed to fit SGS Breeze760 models and other 7-blade Saline Generating Systems Breeze, or Wave salt chlorine generators, as well as CMP PowerClean Salt 760 models. This cell is designed to drop in place and allow you to replace your old Breeze760 cell in minutes. The APEX S7 cell is guaranteed to work and quickly restore your salt system's operation.
Replacing the cell will allow your salt chlorine generator to begin chlorinating again if your old Breeze 760 salt cell has been depleted. The APEX S7 aftermarket cell for Breeze 760 systems is an affordable option to make sure you can keep sanitizing your swimming pool in an eco-friendly and cost-efficient way. It also helps provide a luxurious swimming experience without the eye irritation and dry skin!
Sizing:
When replacing your old Breeze 760 salt cell, take this opportunity to make sure it is sized correctly. Sizing your salt cell properly is key to making sure you will not need to supplement with additional chlorine or shock your pool, and also extends the lifespan of your cell. The industry recommends using a salt cell with a max capacity of 1.5-2 times the actual size of your pool (more is better). The manufacturer rates the Breeze 760 for a maximum capacity of 60,000 gallons.
Compatibility:
The APEX S7 replacement salt cell is 100% compatible with Breeze760 systems (no software/firmware issues). The S7 aftermarket cell for Breeze 760 systems has the same dimensions, threading, and cable connection for direct replacement of the following models:
- SGS Breeze-760
- Older SGS SG-4000
- CMP Breese 760
- CMP PowerClean Salt 760
The APEX S7 Cell is not manufactured, endorsed, or sold by SGS or CMP. Neither APEX nor the S7 cell is affiliated with SGS or CMP; the use of manufacturer names, product names, part numbers, or such trademarks herein are included for compatibility designations and informational purposes only.
To get the most life out of your salt cell and to keep your pool running without unexpected interruptions, make sure it is sized correctly, maintain correct water balance, and be sure and inspect your cell at least every 3 months for leaks, debris, and calcium scale. Be sure to follow instructions in the product manual and clean the cell as often as the system indicates.
General FAQ
If your salt cell needs to be replaced, you probably have a problem with low chlorine, but if your chlorine level is a problem then the cell is only one of several possible issues, notably including excessive chlorine demand. Essentially, you have either a system problem or a water problem.
System problems will generally reveal themselves with error messages or warning lights on the control module. The typical indications of the cell needing replacement will be one or both of the following: Low Salt warnings that are present with correct salinity and Check/Clean Cell warnings that display when the cell is verifiably clean.
If you are referring to buying the same brand, there’s no question that the original OEM salt cell is exactly what your system was designed to use. However, commonly there are aftermarket replacement cells available which fit into place and operate quite satisfactorily. It is your prerogative to employ one of these aftermarket replacements if you are satisfied with the specifications, price warranty, and reported compatibility.
If you were asking about buying the same capacity cell, then OEM or aftermarket alike, you need to first determine whether your control or power module can accommodate a different size. Assuming you can change sizes, a larger cell is virtually always a good choice. However, in downsizing, make sure the smaller cell is still sufficiently large to maintain 1.5-2 times sizing of the cell relative to the pool’s volume.
There are no reviews yet
|
Chlorine Output:
|
1.88 lbs/day
|
|
Manufacturer Warranty:
|
3 Years
|
|
Manufacturer Max Capacity:
|
60,000 gallons
|
|
Salinity Range:
|
4000+ ppm
|
|
Number of Titanium Blades:
|
7
|
|
O-Rings Included:
|
Yes
|
|
Clear Cell:
|
Yes
|
|
Self-Cleaning:
|
Yes, Reverse Polarity
|
|
Cell Cord Length:
|
10' (Included)
|
|
Cable Connection Type:
|
Plugin
|
|
Weight:
|
3 lbs
|
|
Warranty Penalty for Self-Install:
|
No
|
|
Weather / UV-Resistance:
|
Designed for Outdoor Installation and Operation
|
The cell fits into the existing clear housing and comes with a built-in power supply cord. The salt cell has the original threaded connections on the head of the cell, which allow quick access to the titanium plates for service or winter removal (if applicable).
Manufacturer 3 Year Limited Warranty for residential use for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
