The Pentair iChlor-30 salt cell is the factory original replacement cell model designed to easily drop in place and allow you to replace your old iChlor-30 cell in minutes. The iChlor (or i-chlor) cell is the replacement for the latest salt chlorinator models from Pentair. The iChlor-30 replacement salt cell comes with integrated controls (requires existing Ichlor30 power center). The iChlor-30 replacement cell is made to meet or exceed original factory specs and has 100% guaranteed compatibility.
Replacing the iChlor-30 cell will allow your salt chlorine generator to begin chlorinating again if your old iChlor-30 salt cell has been depleted. The iChlor-30 cell sanitizes your swimming pool in an eco-friendly and cost-efficient way, and also helps provide a luxurious swimming experience without the eye irritation and dry skin.
Pentair "Trade Grade" models are restricted by the manufacturer so that pricing or direct purchase is not available online.
Sizing:
When replacing your iChlor-30 salt cell, take this opportunity to make sure it is sized correctly. Sizing your salt cell properly is key to making sure you will not need to supplement with additional chlorine or shock your pool, and also extends the lifespan of your cell. The industry recommends using a salt cell with a max capacity of 1.5-2 times the actual size of your pool (more is better). The iChlor-30 is manufacturer rated for a maximum capacity of 30,000 gallons.
Compatibility:
The iChlor30 replacement cell is only compatible with the Pentair iChlor30 power supply. This replacement salt cell for the iChlor30 is 100% compatible with original systems (no software/firmware issues). The iChlor30 cell has the same length, threading, and cable connection for direct replacement.
To get the most life out of your salt cell and to keep your pool running without unexpected interruptions, make sure it is sized correctly, maintain correct water balance, and be sure and inspect your cell at least every 3 months for leaks, debris, and calcium scale. Be sure to follow instructions in the product manual and clean the cell as often as the system indicates.
General FAQ
If your salt cell needs to be replaced, you probably have a problem with low chlorine, but if your chlorine level is a problem then the cell is only one of several possible issues, notably including excessive chlorine demand. Essentially, you have either a system problem or a water problem.
System problems will generally reveal themselves with error messages or warning lights on the control module. The typical indications of the cell needing replacement will be one or both of the following: Low Salt warnings that are present with correct salinity and Check/Clean Cell warnings that display when the cell is verifiably clean.
If you are referring to buying the same brand, there’s no question that the original OEM salt cell is exactly what your system was designed to use. However, commonly there are aftermarket replacement cells available which fit into place and operate quite satisfactorily. It is your prerogative to employ one of these aftermarket replacements if you are satisfied with the specifications, price warranty, and reported compatibility.
If you were asking about buying the same capacity cell, then OEM or aftermarket alike, you need to first determine whether your control or power module can accommodate a different size. Assuming you can change sizes, a larger cell is virtually always a good choice. However, in downsizing, make sure the smaller cell is still sufficiently large to maintain 1.5-2 times sizing of the cell relative to the pool’s volume.
There are no reviews yet
Questions From Customers
Q:
I have a iCHLOR 15 with a Power Pack PP40DC, can I replace the iCHLOR 15 with an iCHLOR 30 using my Power Pack?
Asked by: Jerry J Rock
- 5/12/2024
1
1
|
Chlorine Output
|
0.95 lbs /day
|
|
Manufacturer Max Capacity
|
30,000 gallons
|
|
Manufacturer Warranty
|
60 day/3 Year Limited (with pro installation
|
|
Warranty Penalty for Self-Install
|
Yes (limits warranty to 60 days)
|
|
Salinity Range:
|
3000-4500 ppm
|
|
Self-Cleaning:
|
Yes, Reverse Polarity
|
|
Clear Cell:
|
No
|
|
Flow switch included:
|
Yes, Independent Flow switch
|
|
Cell cord length:
|
14 ft
|
|
Cable Connection Type:
|
Quick Connect
|
|
Weight:
|
4.5 lbs
|
|
Weather / UV-Resistance:
|
Designed for Outdoor Installation and Operation
|
The Pentair iChlor controls have a backlit LCD screen that displays the power level you set on the unit, and has LED indicators to indicate a low/good/high salt level, chlorine generation, and water flow. The iChlor controls are built in to the system's replaceable salt cell. Be sure to mount the cell in a place where you can easily view and access its controls.
The Pentair iChlor cell is an inline solid PVC housing which contains built-in titanium electrode plates, built-in controls, built-in flow switch, and built-in power supply cord. The iChlor cell has threaded connections on the inlet and outlet, which allow quick access for service or winter removal (if applicable). The threaded connections attach to 2" unions. which are glued to the existing return-line PVC plumbing. Be sure to mount the cell in a place where you can easily view and access its controls. Pentair recommends installing the cell vertically.
Manufacturer 60 Day / 3 Year (with professional installation) Limited Warranty for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
