Sale
Installation Kit
Installation Kit

Installation Kit

Part Number: IKIT
Availability: In Stock.
7
$39.84
Save:$7.34(18%)
$32.50
0 Add to Cart
Begin Checkout
The important installation basics you need
Contains the tools and accessories you need for most pool equipment installations at an unbeatable value. Kit contains: PVC Primer, PVC Cement, and a Hacksaw.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.6

Good quality
It had everything I needed. The glue included was good and thick, made it easy to ensure 100% coverage. I have used thin stuff in the past and ended up having to cut out the pipes and start over because I had a leak from a glue joint that didn't fully seal.
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from Tampa, FL on 3/8/2020
5
Prep kit
Was good for installation. Was not notified that all three were in same box but worked out.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Arlington Texas on 7/4/2019
4
Everything I needed
Good price of everything I needed to do the install, even compared to the hardware store.
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Jacksonville, FL on 12/9/2020
5
Install kit
I first received the kit and the glue was dried up. I contacted DSP and they immediately made it right. Very impressed with their customer service. Would definitely recommend!!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Forsyth on 1/8/2021
5
kit
every day stuff i already had. didnt realize until it came
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from port charlotte florida on 4/21/2020
4
There are no reviews yet
Questions From Customers

Q: Is this kit anything special to pool plumbing? Or can I use PVC Primer and Glue from Home Depot, Lowes, or local plumbing supply store? Are there any particular specs or requirements for the glue?

Asked by: Scott - 5/21/2019
A: You can absolutely use those items if you already have them from the hardware store, pool plumbing PVC is a standard material. This kit just gives you all the exact items you need when the equipment is delivered at the same price. One of the most important requirements for the glue is a "medium-body" so that you are sure to get a fully bonded glue joint. Call us if you have more questions: 866-766-5243
Was this answer helpful?  13 of 13 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/22/2019)

Q: Would I need an install kit to replace a Hayward gold line system? Does the flow switch fit the existing connection?

Asked by: Rodney - 4/17/2019
A: If you're replacing it with a system like the Universal40, then you likely wouldn't need the Installation Kit since the UL40 is a "drop-in" replacement. The cell and flow switch fit in the existing connections.
Was this answer helpful?  2 of 4 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/17/2019)

Q: I bought a generic cell from Australia and the threads appear to be metric.. When connected it leaks from both ends . Is there an adapter for this ? Thank you .

Asked by: Bob - 5/28/2020
A: Bob, not familiar with what that might be, but if you call tech support at 866-766-5243 ext:2 we're glad to get the details and see if we can help you.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/28/2020)

Q: Does the direction of the water flowing into the cell matter?

Asked by: Henry G Martinez - 5/26/2021
A: That will depend on the model of salt system you are referring to. Some systems no, but some systems will have an arrow or otherwise mark on the cell the direction it must be. The manual for your model would best be able to answer that.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/26/2021)

Q: Would a gas pool heater impact the efficiency of the salt?

Asked by: Julie - 10/22/2021
A: It is very common to have a both a gas heater and salt chlorinator installed. The salt chlorinator is installed after the heater and they don't impact each other.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Aaron (10/22/2021)

Q: I have an existing old school Hayward chlorinator (the kind you put tablets in). It looks like the Circupool 35 would fit right in that same spot if I took the Hayward chlorinator out. Do you know if that is the same length, where the new Circupool would fit in that same spot?

Asked by: Brad - 11/17/2022
A: You might be looking at the CORE35 salt chlorinator. It is very compact, but it is not exactly the same length/threads as your current tablet chlorinator (it would not screw on the the existing fittings). The typical installation does usually mean that you put it in the same place in your pool system, so you would basically just cut out the tablet chlorinator and plumb the salt chlorinator in. If you have more questions, give us a call at 866-766-5243
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (11/17/2022)

Q: Will the system affect my solar pool heating system?

Asked by: Roberto - 7/21/2021
A: The manufacturer is always the ultimate authority in compatibility, but pool solar systems are commonly used without issue.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Jeff (7/21/2021)

Q: Would the new Chlorsync cell fit without adjustments to replace the ppc2 auto pilot cell?

Asked by: David Frazier - 6/16/2023
A: No, the Autopilot Chlorsync is actually the same size/fit as the Pentair Intellichlor.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (6/16/2023)