Generic Flow Switch (without PVC Fitting)
Generic Flow Switch (without PVC Fitting)

Generic Flow Switch (without PVC Fitting)

8 Review(s)
Availability: In Stock.
Part Number: GFS
$79.00
Generic Flow Switch for Hayward, CircuPool
Write a Review
Quick Specs View Detailed Specs
1 Year Limited Warranty
Standard Flow Switch, fits Hayward Aqua Rite, CircuPool Si, CircuPool RJ (3rd-gen.), and more. This item includes the Flow Switch and its 15' cable. No PVC T-Fitting is included.

Customers who viewed this item also bought

New to Salt Pools?

What you need to know in 60 seconds!

Q & A

Q: I am looking at the flow switch and need to know if I could just change out the wire? Contractors ripped the wire out of the end connector from the control box.

Asked by: Bruce - 5/28/2017
A: Yes, you can just unscrew your existing flow switch out of its white pvc housing (the black plastic top with the wire coming out has a threaded connection), and then scew this new flow switch back in place, then finally connect the wire of the new flow switch to your existing control box.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Ben (5/29/2017)

Q: Is this a 2" fitting, glue socket, both sides?

Asked by: Steve - 6/7/2017
A: That is correct. For pools with 1.5" plumbing, you simply use reducer bushings that you can get from the local hardware store.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Nathan (6/7/2017)

Q: My message board on my salt water system says "wtr sensor open, chloronator off - no flow." Do I need a new flow switch? How long should a switch last?

Asked by: Kory - 6/23/2017
A: What model system do you have? It sounds like it might be a Hayward Aqualogic system. Flow switches typically last a long time, but it is possible for them to get damaged or fail. A saltwater chlorinator will turn itself off if it doesn't think water is running through it.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Troy (6/27/2017)

Q: I have a circupool SJ 20. Will this connect directly to it?

Asked by: Barney - 8/15/2017
A: No, this flow switch is only compatible with the following models: Hayward AquaRite, Pentair IntelliChlor, CircuPool Si-Series and CircuPool RJ 3rd generation models.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (8/15/2017)

Q: I need just the flow switch for a circu si system can I get just the switch?

Asked by: Eric Farr - 1/5/2018
A: These flow switches come packaged with the white PVC T-fitting, but if you don't need it, you can simply unscrew the switch from the fitting, then screw it in to your existing fitting that is in your plumbing.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Alan (1/5/2018)

Q: will the generic flow switch work on a circupool si 45 cell and system ?

Asked by: SHANE WRIGHT - 4/27/2018
A: Yes it will. It will be a direct one-to-one fit.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Terry (4/27/2018)

Q: Where can I purchase a replacement flow switch and cable? Not a switch housed in PVC...just the switch. Do I have to buy the one in PVC and remove it from its housing?

Asked by: John W. - 5/9/2018
A: This flow switch is just threaded into the PVC housing. You can get it, unscrew it from the housing, and then screw it into your current housing.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Nathan (5/9/2018)

Q: What is rhe hole size on top that is threaded? 1/2, 3/4?

Asked by: Eli - 7/31/2018
No Answers have been submitted yet.

Q: what size is this. 2"?

Asked by: Anthony P Smith - 6/1/2020
A: This is for 2" plumbing
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (6/1/2020)