ControlOMatic MegaChlor salt chlorine generators are specifically designed to retrofit any brand of swim spa, hot tub or small above ground pool up to 17,000 gallons.
When using a regular-size saltwater pool system isn't an option, the MegaChlor chlorine generator is designed to be a very easy to install and does not interfere with the current plumbing or electronics: simply add salt, place in the water, and turn it on. The control unit plugs into a standard 110v GFCI outlet and attaches to the spa's skirt or nearby support in minutes.
Even better - the advanced MegaChlor-CD option includes patent pending chlorine detection technology which allows for automatic operation - no need to manually monitor and adjust your chlorine levels. Make your swimspa, pool, or hot tub sanitation effortless.
The MegaChlor is plug-and-play! However, if you're looking for a concealed installation, the MegaChlor Inline option allows the system to be connected to your existing pump/filter system and remain out of sight. Important: inline operation should be used with continuous pump operation or where power can be coordinated to turn pump and salt system on and off together. The MegaChlor Inline option utilizes 2" Schedule 40 FPT PVC connectors, which can also be adapted as needed for virtually any plumbing type using off-the-shelf hardware. The MegaChlor can also be utilized as a hot tub and spa saltwater bromine generator, for spas that currently use manual bromine sanitation
Why convert to salt? Because of the higher temperatures involved in spas, the chemical balance must be continuously maintained in order to stay safe. Keeping up with spa and hot tub maintenance can be a challenge - forgetting to add chlorine or bromine just once can lead to cloudy, smelly water problems. Even conventional chlorine feeder systems run out! Instead, Controlomatic MegaChlor salt chlorinators allow you to automatically and consistently ensure crystal clear water without buying or adding anymore traditional chlorine or bromine. Using a low level of natural salt, the MegaChlor continuously sanitizes the water while eliminating the harsh chemical odors. That means a luxurious & natural experience when you swim or soak, and worry-free & cost-effective maintenance along the way.
Features
- Drape-Over and concealed install.
- Adjustable chlorine output.
- Patented temperature compensation.
- Salt level indicator.
- Easy to use control panel.
- Usage boost mode.
- Automatic self cleaning
General FAQ
These saltwater chlorine generator systems come with everything you need except salt, PVC glue, primer, a saw, and a few common tools.
In addition to adding salt to your pool water, installation entails adding one new piece of equipment to your pool. This can be performed by a handyman, plumber, electrician, pool contractor or Do-It-Yourself (DIY).
If you are contemplating installation, read more here.
The simple, industry-wide, rule-of-thumb is that your salt system should be sized at 1.5 times your pool size, or more, for the temperate and colder parts of the US.
If you live in the southern sunbelt, then you should select a system with specs of at least 2 times your pool size.
Bear in mind that an undersized system will be a constant challenge, at best, while an oversized system will extend cell life and give you reserve capacity for weather events and periods of heavy use.
To find out more, click here.
There are no reviews yet
Questions From Customers
Q:
will this generator work in an above ground pool
Asked by: rick
- 4/24/2020
1
Q:
Is this made in China? We've had bad experience before, went through 3 Intex units in one month.
Asked by: Rose
- 5/1/2020
1
Q:
do t need a pro to install in my in ground swim spa?
Asked by: john
- 9/5/2018
1
Q:
hi, first thing can this product work in uk,? my swim spa holds 5500L of water how much salt do I need to add to get started?, I will empty and clean out my pool and fill with fresh water. thankyou for your help
Asked by: Peter Bellis
- 2/6/2020
1
Q:
Can you replace the cells after they wear out?
Asked by: Bob
- 5/31/2020
1
Q:
Can this be used with a vinyl sided (intex easy set) above ground pool? I saw another system could only be used on hard-sided above ground pools. Thank you!
Asked by: Elizabeth
- 6/9/2020
1
Q:
How long is the power cord?
Asked by: Tina Steffen
- 5/3/2023
1
Q:
Is this made in China? We've had bad experience before, went through 3 Intex units in one month.
Asked by: Rose
- 5/1/2020
1
Q:
Does this model include the chlorine detection technology?
Asked by: Ron
- 9/7/2019
1
Q:
How long will the plates in the drape over last?
Asked by: MarkMar42 Johnson
- 5/22/2020
1
10
Specs:
|
Chlorine Output:
|
.24 lbs/day
|
|
Manufacturer Rated Lifespan:
|
7,000 hours
|
|
Manufacturer Max Capacity:
|
17,000 gallons
|
|
Salinity Required:
|
2000-4000 ppm
|
|
Self-Cleaning:
|
Yes
|
|
Boost Mode:
|
Yes
|
|
Warranty Penalty for Self-Install:
|
No
|
|
Rated Amperage (110V/220V):
|
1.8A / 0.9A
|
|
Weather / UV-Resistance:
|
Designed for Outdoor Installation and Operation
|
The MegaChlor control panel is a small unit that can easily be mounted to the side of the spa or a attached to a nearby support. Its controls have three buttons for adjusting the chlorine or bromine production, and four indicator lights that let you know when it is generating or when you might need to check the cell. For power, the controls simply require a standard GFCI outlet.
The control panel has two power adjustment buttons to control the amount of sanitation, and one button to activate its boost mode. Its LED indicators let you know what power setting you have it on and if your salinity level is low, OK, or high.
ControlOMatic also makes kits available to allow concealed installation of the power supply (manufacturer part: CM-PS-HIDE).
The MegaChlor Cell simply drapes over the side of the hot tub into the water when you desire active spa sanitation, the spa doesn't even have to be on or running! The clear cell lets you see it working and allows for easy inspection.
The Cell can also be installed out-of-sight directly into the spa's filter area when appropriate (see manufacturer recommendations) using the optional kit (manufacturer part: CM-CELL-HIDE).
The ControlOMatic MegaChlor comes with:
- 15' Power Supply Cord
- 15' Cell Supply Cord
- Control Box
- Low 5.5V DC Power Supply, 100/240VAC input
- Salt & Chlorine Test Strips, 10 count
- Owner's Manual, cable clips
