Sale
Custom Molded Plastics Inline 2
Custom Molded Plastics Inline 2' Zinc Anode & Water Bond with Copper Wire

Custom Molded Plastics Inline 2" Zinc Anode & Water Bond with Copper Wire

Part Number: 25810-400-050
Availability: In Stock.
$108.00
Save:$38.12(35%)
$69.88
0 Add to Cart
Begin Checkout
Due to industry-wide supply constraints, this item may be substituted for an equivalent model
Need to re-bond your pool? Easy retrofit for most pools. Not required just because you are adding a salt chlorine generator for most pools.

This item is NOT typically required just because a salt chlorinator is being installed.

Without proper bonding, a small stray electrical current (galvanic reaction) can be generated in a pool because of the presence of multiple types of metal, even when the pool is not running. This current must be controlled to meet new building codes and to prevent possible corrosive damage to those metal pool components. If the pool does not have proper bonding, or if you have replaced your pool lights which were previous providing the bonding source, a sacrificial zinc anode is a simple solution to protect the entire pool.

This zinc anode provides an easier path for galvanic reaction to be attracted to, protecting expensive metal pool components. The zinc anode is simple to replace when the inexpensive zinc anode is roughly half-eroded; the sacrificial zinc anode lasts approximately 3 years in most cases. Its compact space-saving design is easy to plumb in.

CMP Zinc Anode Instructions

There are no reviews yet
Questions From Customers

Q: Where does this get installed in the filter system? Does the wire extension need to be immersed in the water?

Asked by: Phivel Caplan - 12/8/2020
A: CMP recommends installing it near the filter/heater.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Nathan (12/8/2020)

Q: Does CMP 25810-150-000 fit on 2” pvc without adapters?

Asked by: Tom - 2/19/2021
A: This item's female slip fittings directly accept male 2" PVC pipe.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (2/22/2021)

Q: hello i bought the circu 55 and i was wondering if i should buy the anode and how should i install thanks.

Asked by: VINCENT RIVERA - 3/18/2021
A: Anodes are not strictly required but are helpful if your pool is not bonded properly anymore, or just for an extra layer of electrical protection. This model goes in the plumbing, typically after the filter.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Christopher (3/19/2021)

Q: Where does metal coil get connected to?

Asked by: Jimmy - 8/14/2023
A: This item gets connected to your pool's bonding wire (bare copper wire that gets linked to all your pool equipment and metal pool components).
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (8/16/2023)