SALE: Up to $500 Instant Savings - Limited Time Only!
  1. Home
  2. Parts
  3. Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)
Sale
Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)
Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)

Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)

Part Number: STAND
Availability: In Stock.
Estimated Delivery Times
28 ASK A QUESTION:
$43.00 $29.00
$42.99
Save:$13.99(33%)
0 Add to Cart
Begin Checkout

Cleaning Stand fitting Hayward Salt Cells and select CircuPool Salt Cells

fitting
Makes regular maintenance a breeze

Generic cleaning stand for Hayward AquaRite and CircuPool systems (only RJ+ 3rd-Generation, Universal, and Si models) makes the cleaning process quick and convenient whenever you need to remove mineral build up from your salt chlorine generator cell. Includes o-ring to fully seal and cap one end of the electrolytic cell for cleaning. Simply fill the cell with cleaning solution, allow it to soak inside, then easily dispose of cleaning solution. This aftermarket PVC part is not manufactured by Hayward


*Please note this product is not affiliated with Hayward Industries, Inc. The use of such trademarks herein is for informational purposes only, and the product(s) are not those of Hayward Industries Inc., but rather are simply compatible with the referenced Hayward product.


Rating Snapshot

Select a row below to filter reviews.

5 Stars
25
4 Stars
1
3 Stars
2
2 Stars
0
1 Stars
0

Average Customer Ratings

4.8

View All Reviews - Reset
Perfect seal
Love that this is so small and acts as a stand too. It has a built in seal so it ensures no leaks and keeps the cell topped up while the acid is working away. This ensures the whole cell is cleaned. I thought it was a little pricey and hesitated ordering - but now I have it, I am glad. Easy to use.
Did you find this helpful?  8 of 9 Found Helpful
Reviewed by:  (Verified Buyer)  from Atlanta on 4/3/2018
5
Cell Cleaning stand
Wow, This really helps with the cell cleaning. I was using a bucket to clean but realized I was wasting chemicals. This stand made my life a lot easier and uses less chemicals while cleaning the cell much better. Worth the cost and I highly recommend this stand for anyone who owns a salt water system.
Did you find this helpful?  5 of 7 Found Helpful
Reviewed by:  from Montebello,Ca on 8/1/2018
5
good improvement
Much nicer than a simple cap. Keeps my circupool filter upright during descaling much better than a makeshift prop.
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from Miami, FL on 5/11/2018
5
Handy device
Simple design. Handy little device that makes your cell cleaning job quite easy
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Lebanon,Ky on 9/1/2018
5
Big time saver
I wish I would have got this from the start, its so much easier than using a big bucket to clean my cell.
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Boynton Beach FL on 9/1/2019
5
Load More
There are no reviews yet
Questions From Customers
Ask A Question

Q: Will this cleaning stand fit a circupool RJ-45 cell with serial # 05AB0xxxxxxxxxxx?

Asked by: Oscar - 5/20/2018
A: Yes! Even without your serial number, if your cell is a straight, in-line design, and if your controller has a big button on it that says "MENU", this will work for you.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/21/2018)
Submit an answer

Q: will this peice connect to a Tubro Cell L940

Asked by: Kenneth Roberts - 6/8/2020
A: Yes, the threads on an aqua rite 940 cell are the same, so it will screw right on.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Daryl (6/9/2020)
Submit an answer

Q: Will this for sure fit the Pentair Intellichlor and Hayward Aquarite? I thought the threading was different between the two manufacturers. Let me know thanks.

Asked by: Eddie - 2/25/2019
A: I've used this on my Pentair Intellichlor and it threads on and seals just fine.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Andy (5/4/2019)
Submit an answer

Q: Will this fit a RJ60+?

Asked by: Scott - 10/3/2023
A: Yes, this stand is compatible with all RJ+ models
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: James (10/4/2023)
Submit an answer
Questions? Ask here

Features

  • Easily attaches to the threaded connections on one end of the cell, providing a stable base while allowing your cleaning solution to soak directly inside of the cell.
  • Minimizes amount of manual handling required while cleaning cell, and makes it a simple, neat process.
  • Minimizes amount of acid cleaning solution required.
  • Minimizes amount of cleaning solution to dispose of.

Color of cleaning stand may vary.

Manufacturer 1 Year Warranty. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
About / Contact Us
DSP is the largest specialty provider of saltwater swimming pool equipment.
Get Product Support
Directory for product support for popular items.
Get Expert Help
Customer Care: 866-766-5243
Live Help: Chat
Customer Reviews