CircuPool Vertical Installation Kit
CircuPool Vertical Installation Kit

CircuPool Vertical Installation Kit

26 Review(s)
Availability: In Stock.
Part Number: CIRVIK
$29.00
CircuPool Vertical Installation Kit
Write a Review
Quick Specs View Detailed Specs
Greatly reduces installation space required
Allows adaptation from older models

CircuPool Vertical Installation Kit. Reduces plumbing space required by 50% and allows for easy installation even in tight spaces. Fits RJ-Series and Si-Series. Allows for easy conversion from Circupool RJ Classic models. Installation kit includes PVC fittings and pre-cut pipes needed for quick assembly for the following configurations: 1) 90 degree elbows on inlet/outlet for standard plumbing with new installations, 2) straight connections that can be glued into existing RJ Classic barrel unions.

** Does not come with cell or flow switch **

Customers who viewed this item also bought

New to Salt Pools?

What you need to know in 60 seconds!

Related Items

Q & A

Q: Is this for 1.5" or 2" pipe?

Asked by: Dave - 4/19/2017
A: When used with the fittings that come with the saltwater chlorine generator, it can be plumbed into either size piping.
Was this answer helpful?  4 of 9 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/19/2017)

Q: Universal Si40: Will the inlet (cord side) be reversed for vertical installation, the way it is pictured in your example?

Asked by: Joe - 5/9/2019
A: Great question. With that model (or the RJ model in the picture) the cell can face either way. It does not matter which side is the inlet or outlet.
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/10/2019)

Q: How tall is the vertical installation kit?

Asked by: Nate - 5/18/2018
A: Make sure you have about 16"-18" of space above your plumbing.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Nick (5/21/2018)

Q: can Circupool vertical be set up horizontally? Have RJ 30; problems with space.

Asked by: Dorothy Porta - 6/26/2018
A: Can you use this kit in a way that it orients the cell horizontally? I don't see why not. This system's cell and flow switch work whichever way they are pointed.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Vince (6/26/2018)

Q: Will the vertical mounting kit work with the CircuPool Universal 40 cell?

Asked by: ALLEN SEAVER - 6/28/2018
A: Good question, yes this will also work with the Universal40 model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (6/28/2018)

Q: I'm converting from a Zodiac and want to be sure the spacing works. Is the 6 1/2" shown in the picture a center to center measurement or end to end?

Asked by: Sstep - 9/8/2019
A: I believe it is the width of the gap to cut in the plumbing in order to fit the kit in between.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Charles (9/9/2019)

Q: What parts exactly does the kit include? Thank you

Asked by: Frank Garcia - 4/15/2020
A: This kit includes everything pictured except the actual components that belong to the salt chlorinator (the flow switch and the salt cell). It is all plumbing fittings and pipe needed to install the equipment as described.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/16/2020)

Q: I have just enough space to maybe not use this but if I decide to get this. I have 2 questions. The 1st is will it decrease pressure in the system because of adding a vertical section. So I would have to run my vari. Pump at a higher setting? And the second is could I put this in horizontal? Thanks.

Asked by: Dan - 4/18/2020
A: I would be surprised if the 4 extra fittings in this kit creates a meaningful impact on flow. If you mean by putting this in horizontal, to attach this kit to a vertical pipe, it might stick out but it should not make the salt system work any differently.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Tim (4/19/2020)

Q: What is the center to center of the upright pipes without the elbows? I have a compu pool generator with the 4 1/2" center to center and no room to cut the pipes and redo them

Asked by: Bruce - 7/2/2020
A: If you have a CPSC model, this kit will work with your existing fittings as well so that you do not have to replumb.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (7/2/2020)