CircuPool® Si-45 Replacement Salt Cell
CircuPool® Si-45 Replacement Salt Cell

CircuPool® Si-45 Replacement Salt Cell

7 Review(s)
Availability: In Stock.
Part Number: Si45-RC
$498.00
Genuine OEM Replacement Salt Cell for the CircuPool Si45 salt chlorine generator. 45,000 gallon max capacity.
Write a Review
Quick Specs View Detailed Specs
Power: 2.0 lbs/day
4 Year Limited Warranty
10000 Hours Rated Lifespan
45000 Gallons Max Capacity

The Si-45 replacement cell is compatible with all CircuPool’s Si series control modules except the Si-60. The Si-45 salt cell is the factory original replacement cell model designed to easily drop in place and allow you to replace your old Si-45 cell in minutes. This cell is made to meet or exceed original factory specs and has 100% guaranteed compatibility.

Replacing the Si-45 cell will allow your salt chlorine generator to begin chlorinating again if your old Si-45 salt cell has been depleted. The Si-45 cell sanitizes your swimming pool in an eco-friendly and cost-efficient way, and also helps provide a luxurious swimming experience without the eye irritation and dry skin.

Note: NOT COMPATIBLE with Hayward AquaRite, Swimpure Plus, Mineral Springs, or other related systems.

Sizing:

When replacing your Si-45 salt cell, take this opportunity to make sure it is sized correctly. Sizing your salt cell properly is key to making sure you will not need to supplement with additional chlorine or shock your pool, and also extends the lifespan of your cell. The industry recommends using a salt cell with a max capacity of 1.5-2 times the actual size of your pool (more is better). The Si-45 is manufacturer rated for a maximum capacity of 45,000 gallons.

Compatibility:

This replacement salt cell for the Si-45 is 100% compatible with original systems (no software/firmware issues). The Si-45 cell has the same length, threading, and cable connection for direct replacement.

To get the most life out of your salt cell and to keep your pool running without unexpected interruptions, make sure it is sized correctly, maintain correct water balance, and be sure and inspect your cell at least every 3 months for leaks, debris, and calcium scale. Be sure to follow instructions in the product manual and clean the cell as often as the system indicates.

Customers who viewed this item also bought

New to Salt Pools?

What you need to know in 60 seconds!

Related Items

Q & A

Q: Will the replace the si-plus and is the cable included?

Asked by: Keith - 8/6/2017
A: Yes, the Si-45 cell is 100% compatible if you are replacing a "Si-45 Plus" version, same power, same physical size and connections, and it does include the cord. It should be plug and play to hook up. Just a tip: depending on the age of your controller, you may or may not need to change an electronic setting. Just give our support line a call and we can help you determine that.
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (8/7/2017)

Q: Will this work with an Aqua Rite (aquatech-Goldline Controls) control panel?

Asked by: barry - 3/5/2018
A: This will not work with a Hayward/Goldline Aqua Rite control panel, but here is a link to the cell that is made to work with Hayward/Goldline controls: https://www.discountsaltpool.com/Replacement-cell-for-HaywardAqua-rite-T-15_p_144.html
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (3/5/2018)

Q: Can use the si45 to replace the si45 plus?since I don’t see it being sold here anymore.

Asked by: Shawn - 4/8/2018
A: Yes, they don't make the "plus" versions of this model any more, but you can use the regular version, and it's less expensive too.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Joe (4/8/2018)

Q: Will the SI-45 be a good replacement for Si-30 using same controller I already Have? Also will it fit in the piping the same?

Asked by: Andrew T Richman - 5/19/2020
A: Yes, its a good value to upgrade to. Same fit, you just need to change the cell type on the electronic controller.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Kim (5/19/2020)

Q: I have a 2014 Circupool Si-45 plus cell and controller, is it compatible with this Si-45 cell?

Asked by: Trevor - 4/9/2019
A: Yes, you would replace it with this model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/9/2019)

Q: How often do you replace the cell of a salt water pool?

Asked by: Hayley Harris - 4/11/2020
A: It depends on which model you have, the size of your pool, and how you use it of course. But for this model I would say the average would be about 4-5 years.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (4/13/2020)

Q: We installed a SI-30 system in June 2016. We have a 15,000 fiberglass pool in south Alabama and run the system 10 hours a day. The cell needs to be replaced. Can I replace it with an Si-45 cell.

Asked by: MLG - 11/15/2020
A: Yes you can. Getting a larger cell usually a better value because it will get less daily wear-and-tear, and it will also give you much more capability to clear the water up when needed.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (11/16/2020)

Q: can i still get a SI40 if so how much

Asked by: Richard Burrell - 8/28/2021
A: The cell is interchangeable for 40 / 45 systems. You can find that item here: https://www.discountsaltpool.com/circupool-si-45-replacement-cell
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (8/31/2021)