CircuPool EDGE-40 Salt Chlorine Generator

I cut old system out put this in line with one 2inch extra pipe approx 6 inches in legnth, and two couplings. Took me approx 39 min because of space. Then electronics were plug and play to system, an hard wire power direct. I recommend the UV system also, for absolute crystal clear water. Aftee two days I checked the water and it was perfect. No need to get technical, because Circupool has there systems perfected. Personally I believe they are the best currentmy in the pool industry. If you are in SC look to Lee OnAWhim For your Circupool needs.

After 20+ years of running product Z's built-for-obsolescence salt generators, I threw in the proverbial towel and went searching for a better alternative to replacing an expensive cell every year or so. Enter CircuPool. I asked a few questions on their site tech support and every question was promptly answered by a real person with a name! Wonderful start! So for a little more than yet another cell replacement, I purchased an Edge45. Replacement was a little tricky, since the Edge curiously doesn't come with the 16' cords I was used to. The Edge has 8' cords for the flow sensor and cell power, and a 3' main power cord (not a problem there). Hook up into my automation circuit box was a snap with an electrician's guidance (I'm a retired pool pro). From there, I rerouted my return line to accommodate the 8' reach of the Edge cords. The Edge flow sensor and cell comes with handy connector ports that you just plug the terminals on the cord into. It's a little puzzling why Circupool doesn't offer an similarly connection-terminal equipped extension cord as an option - it would seem to make to sense to me and open up the usage to many who's equipment is situated away from the electric source. The unit functions perfectly so far, we'll see how long the 7 year limited warranty cell lasts, but that is a hefty warranty for this type of product. The electronics are touted as advanced technology and the compact power box reflects that claim. No more interface with the automation display, but also, no more "General Fault" indications! I highly recommend this easily available product as a much-needed alternative to the Big 3 systems and their limited distribution policies. If this works out, I'll be back for the Ph controller! Summary: 4 stars for a limited length power cord that should be an easy fix. 5 stars for the excellent customer support and otherwise product design, which includes a see-through cell and cell-cleaning cap.

This is my second salt system. I replaced a Swimpure Plus that I had for about four years. The first thing that I noticed is that it is much more modern electronics. It makes the old salt system seem like an old brick cell phone, and its much more consistent and predictable. The old one would always give false salt readings and I had to take the cell apart every other week. This has been smooth sailing, and is noticably more powerful able to keep the chlorine level up even when my kids track lots of gunk in the pool.

I was one of the first people I know to get a salt pool, about 15 years ago...it was a ClevaChlor and it finally died so I just bought this to replace it. It's only been a short time but this machine is obviously light years ahead of what I had. It weighs a fraction of the one I ripped out and it stays cool even when turned up to 100%. I also like that it works in such a wide range of salinity so no more of those worries. I have to mention also how neat it looks with the violet light bar around the edge; I take my friends out back at night just to show it off!

My old Circupool RJ 20 was starting to give me problems - over salt light alternately on and then off, not all message lettering fully displayed. I had the option of returning unit to be analyzed and repaired or purchase a newer model. Being not one to spend at least half the cost on a new something or other I will usually buy new, which is why I bought the new Edge 40 that was recommended to me by Ali. Ali also managed to get me a loyalty discount as a repeat customer (thanks Ali!). I was getting a new state of the art chlorine generator, advanced electronics being kept cooler, and not to mention a new warranty. The new unit was easy to install, can run on either 110v or 220v, and is producing more chlorine than ever allowing me to run the unit less, which should prolong the life of the salt cell. I can only hope the unit will last me a long time. I highly recommend this unit to anyone considering the purchase of a new generator.