SALE: Upgrade to next larger size for $10 - It's Wise To Oversize!
  1. Home
  2. Parts
  3. Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)
Sale
Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)
Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Part Number: BYPASS
Availability: In Stock.
Estimated Delivery Times
23
$45.99
Save:$14.00(30%)
$31.99
0 Add to Cart
Begin Checkout
Aftermarket Bypass Cell for use during Winter or Salt Pool Equipment Maintenance
Easily Run Your Pool Circulation During Winter Or Maintenance

Generic saltwater bypass cell (dummy cell) for the Hayward® Aquarite® Series, Swimpure Plus® Series, Mineral Springs®, Blue Essence®, and CircuPool systems (only RJ+ 3rd-Generation, Universal, and Si models). Allows easy cell removal for repairs, maintenance, and winterizing. This 100% compatible aftermarket PVC part is not manufactured by Hayward


*Please note this product is not affiliated with Hayward Industries, Inc. The use of such trademarks herein is for informational purposes only, and the product(s) are not those of Hayward Industries Inc., but rather are simply compatible with the referenced Hayward product.


Rating Snapshot

Select a row below to filter reviews.

5 Stars
21
4 Stars
1
3 Stars
1
2 Stars
0
1 Stars
0

Average Customer Ratings

4.9

View All Reviews - Reset
A must have
This bypass cell is better described as a blank pipe. During the winter when the water is too cold to produce chlorine, I take my SWG cell out and store it in the garage while the blank pipe allows to switch back to a chlorine pool and serves to keep circulation going. It also served when my cell needed maintenance and again the blank pipe allowed me to switch back to a chlorine pool until the cell was repaired.
Did you find this helpful?  2 of 4 Found Helpful
Reviewed by:  from N. Augusta on 5/23/2019
5
Bypass Cell
I bought this on sale and just before I installed my Circupool Universal 40. Prior to getting to work with the installation, I compared the size of the salt cell and the bypass cell. They were identical, so I deceided to use the bypass to mock up the installation as it is lighter and easier to handle in the tight space I had to work in. When the time came to finally install the salt cell, it fit perfectly. I know this was not its intended purpose, but it worked. Well made and precise.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Temecula, Ca on 12/24/2021
5
A Simple Maintenance Solution
An inexpensive and simple answer for running your pool while the chlorinator is being serviced.
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from Delray Beach on 2/13/2019
5
bypass
great fit and worked great
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from portland, maine on 5/21/2019
5
Outstanding
Fits perfect
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from VA on 4/19/2020
5
Load More
There are no reviews yet
Questions From Customers
Ask A Question

Q: What's the length of the pipe?

Asked by: Wylie - 3/26/2017
A: The Bypass cell is an exact fit for Hayward Aqua Rite, Hayward SwimPure Plus, Mineral Springs, Pentair IntelliChlor, CircuPool RJ (3rd-generation), CircuPool Si, CircuPool Universal, and other salt chlorinators that use this industry standard plumbing size and threads. The length of the cell is approximately 12 1/4 inches.
Was this answer helpful?  5 of 7 Customer(s) found this Answer helpful.
Answer provided by: Terrence (3/27/2017)
Submit an answer

Q: Is this compatible with AQRS340 for a Hayward Aquarite S3 unit?

Asked by: wahoo98 - 8/21/2022
A: Yes, that unit has the same length / threads.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Carl (8/22/2022)
Submit an answer

Q: Can you give me dimensions including thread diameter or size? I'd like to use this as a spool piece to splice out a Jandy 1400 salt cell. Would it be a simple screw in?

Asked by: John Mykytka - 6/5/2017
A: Unfortunately, Jandy uses a unique sized cell, and this would not be compatible. It is about 12 1/4 inches long.
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: Stephen (6/5/2017)
Submit an answer

Q: You answered a previous question about using the bypass for the Aquapure 1400 by saying the length was not compatible, but are the unions compatible?

Asked by: Jeff - 4/21/2018
Give our support team a call for more immediate help with this question at 866-766-5243. No Answers have been submitted yet to this Question.
Submit an answer

Q: I have pentair equipment on my salt water system, I have an electronic switching system for exterior lights, spa, waterfall etc. which transmits wireless signals to my electrical enclosure outside.Can I find a replacement for it? Cost etc.??

Asked by: L Simpson - 9/21/2019
A: This bypass cell will work for your salt system, but are you looking for the power module for the Pentair Intellichlor?
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (9/23/2019)
Submit an answer

Q: Does the BYPASS cell fit the Circupool Edge 40? If not, do they sell one?

Asked by: Denis Massa - 4/10/2020
A: This would be the Bypass Cell you would want for a CircuPool Edge model: https://www.discountsaltpool.com/CircuPool-EDGE-Bypass-Cell_p_408.html
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (4/10/2020)
Submit an answer

Q: Will this fit a CircuPool RJ-30 PLUS Salt Chlorine Generator Product ID: RJ30N?

Asked by: Brian - 10/24/2021
A: Yes, this is a direct fit for that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (10/25/2021)
Submit an answer

Q: What exactly does the "winter" mode do and how is it used on the RJ60 generator?

Asked by: Ricky Bickerstaff - 5/27/2022
A: On that model, it is a one-touch button to cut the chlorine output setting in half. A common use would be when a pool has a cover put on it during times it is not in use. With a cover and/or cold season weather a pool needs much less chlorination. Pools around the county can have very different winterization processes though, so this may or may not apply to you.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Roger (5/27/2022)
Submit an answer

Q: Will this bypass pipe fit a Hayward AQR100?

Asked by: Mark - 7/1/2022
A: No, that is not a compatible model
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Steve (7/1/2022)
Submit an answer

Q: How long is the dummy cell?

Asked by: Craig - 9/19/2022
A: This cell is about 12 5/16" long
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Tim (9/19/2022)
Submit an answer
Questions? Ask here
About / Contact Us
DSP is the largest specialty provider of saltwater swimming pool equipment.
Get Product Support
Directory for product support for popular items.
Get Expert Help
Customer Care: 866-766-5243
Live Help: Chat
Customer Reviews