Solaxx Inline 2
Solaxx Inline 2' Zinc Anode & Water Bond with Copper Wire

Solaxx Inline 2" Zinc Anode & Water Bond with Copper Wire

Write a Review
Availability: In Stock.
Part Number: REG20A
Retail Price:$108.00
You Save:$38.12(35%)
Due to industry-wide supply constraints, this item may be substituted for an equivalent model
Need to re-bond your pool? Easy retrofit for most pools. Not required just because you are adding a salt chlorine generator for most pools.
See Estimated Delivery Times ⛟

This item is NOT typically required just because a salt chlorinator is being installed.

Without proper bonding, low-level stray electrical current (galvanic current) can be generated in a pool because of the presence of multiple types of metal, even when the pool is not running. This current must be controlled to meet new building codes, provide a local ground, and to prevent possible galvanic corrosive damage to those metal pool components. If the pool does not have proper bonding, or if you have replaced your pool lights which were previous providing the bonding source, a sacrificial zinc anode is a simple solution to protect the entire pool.

This zinc anode provides an easier path for galvanic reaction to be attracted to, protecting expensive metal pool components. The zinc anode is simple to replace when the inexpensive zinc anode is roughly half-eroded; the sacrificial zinc anode lasts approximately 3 years in most cases. Its compact space-saving design is easy to plumb in.

Zinc Anode Instructions

New to Salt Pools?

What you need to know in 60 seconds!