The AutoPilot ChlorSync Gen II + PPM1 Manifold (up to 30,000 gallon pools) is technologically advanced. Its controls feature a LCD display, that lets you view current pool water temperature and salt level (and see how much salt to add when needed with PoolSync
add-on), chlorine production level, and allows a 24-hour boost cycle. The ChlorSync's Tri-sensor ensures proper flow, temperature, and salinity levels and has patented temperature compensation. Optional PoolSync add-on mounts near pool equipment and allows connection to available wifi for remote
operation. Its streamlined design allows for simple installation and service. For pools up to 30,000 gallons maximum.
General FAQ
These saltwater chlorine generator systems come with everything you need except salt, PVC glue, primer, a saw, and a few common tools.
In addition to adding salt to your pool water, installation entails adding one new piece of equipment to your pool. This can be performed by a handyman, plumber, electrician, pool contractor or Do-It-Yourself (DIY).
If you are contemplating installation, read more here.
The simple, industry-wide, rule-of-thumb is that your salt system should be sized at 1.5 times your pool size, or more, for the temperate and colder parts of the US. If you live in the southern sunbelt, then you
should select a system with specs of at least 2 times your pool size. Bear in mind that an undersized system will be a constant challenge, at best, while an oversized system will extend cell life and give you reserve
capacity for weather events and periods of heavy use. To find out more, click here.
There are no reviews yet
Questions From Customers
Q:
I have a 18 x 48 above ground pool, I really want to convert to salt, but have no idea how to or what I would need for a unit
Asked by: BECKIE
- 6/10/2021
1
Q:
Can cell be installed vertically or just horizontal?
Asked by: JR
- 6/4/2021
2
Q:
Does this work on above ground pools?
Asked by: Keith Allen
- 6/8/2021
1
Q:
What is the size of intake and outtake connector?
Asked by: Steven R
- 9/15/2021
1
Q:
I’m looking at the CS30-ECP0312 generator system. Just to confirm, that comes with the power supply? Is there anything else I need to make the system work besides obvious salt, etc? Thank you.
Asked by: Bob Helligrass
- 3/17/2022
1
Q:
Can the data cable for the PoolSync transmitter be replaced with a longer one? My pool equipment is on the far side of the pool from my house and wouldn't otherwise reach the Wi-Fi signal unless I can run 50' or so of data cable and mount it closer to the house.
Asked by: Ryan
- 3/9/2023
1
Q:
Will any of these salt systems hook to any pump?
Asked by: Don Decamp
- 5/28/2021
1
Q:
Will the replacement cell work with Pentair Intellichlor Power Center?
Asked by: Stan
- 7/21/2021
1
Q:
I have a 30 ft round by 4.5 ft average depth pool will the cs30 take care of my pool? If it will what else will I need to buy, other than simple connectors and salt, will I need to buy?
Asked by: Lucian
- 3/22/2022
Give our support team a call for more immediate help with this question at 866-766-5243. No Answers have been submitted yet to this Question.
0
Q:
I am currently using 3 inch chlorine tabs in my pool. What would I need to do to convert to the CS 30 salt system?
Asked by: Lucian
- 3/22/2022
Give our support team a call for more immediate help with this question at 866-766-5243. No Answers have been submitted yet to this Question.
0
9
| Chlorine Output: | 1.2 lbs /day |
| Manufacturer Warranty: | 3 Years Limited |
| Manufacturer Max Capacity: | 30,000 gallons |
| Controls: | Digital - LCD Display Screen, LED Indicators |
| Salinity Range: | 2500-3500 ppm |
| Salinity Test: | Yes - Low, High, Displays ppm |
| Self-Cleaning: | Yes, Reverse Polarity |
| Warranty Penalty for Self-Install: | No |
| Clear Cell: | Yes |
| Boost Mode: | Yes, 24 hours |
| Winter Mode: | No |
| Flow Sensor: | Yes, Independent Flow Switch (as low as 20gpm) |
| Power Cord Length: | 2.5’ |
| Cell Cord Length: | 14’ |
| Rated Amperage (110V/220V): | 2A / 1A |
| Weather / UV-Resistance: | Designed for Outdoor Installation and Operation |
The Autopilot ChlorSync controls are permanently integrated into the ChlorSync Power Center. The small digital display screen shows the chosen percentage chlorine output level, pool salt level, or temperature. The keypad controls allow you to raise and lower the chlorine output enter the menu system, and activate the boost (24 hours) mode. Optional PoolSync units also allow for remote wifi connection, allowing: remote control, viewing salt level and temperature, see how much salt to add when needed, receive notification when the cell needs to be cleaned or alerts should the unit need any attention, and automatic cover connection capability. The ChlorSync controls have automatic model detection, which allows any size ChlorSync cell to work with the single available ChlorSync Power Center.
The Autopilot ChlorSync Electrolytic Cell contains built-in titanium electrode plates and built-in tri-sensor (flow switch, temperature sensor, and salinity sensor). The salt cell has threaded connections on the inlet and outlet, which allow quick access for service or winter removal (if applicable). The ChlorSync salt cell operates at flow rates as low as 15 gpm.
The Autopilot ChlorSync Power Center is a small box that mounts on the wall (or nearby a post or support) by hanging it on a few keyholes on basic screws that have been secured in the wall. The ChlorSync comes with wall-mount hardware and instruction manual.
Manufacturer 3 Year Warranty for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.
