Get Up
to $75
Rebate
Autopilot PPC1 Replacement Salt Cell (for RC-35/22, SC-36 cells)
Genuine Pool Pilot Replacement Cell for all SC-36, RC-35, or PPC1 Autopilot Models

Autopilot PPC1 Replacement Salt Cell (for RC-35/22, SC-36 cells)

4 Review(s)
Availability: In Stock.
Part Number: PPC1/RC-35-RC
Retail Price:$399.00
You Save:$100.00(25%)
$299.00

Manufacturer Rebates: Up To $75 Rebate on AutoPilot Salt Cells (See Details)

Note: Autopilot requires cord replacement to provide warranty on new cells.

Choose Options

*
Write a Review
Quick Specs View Detailed Specs
Power: 1.28 lbs/day
2 Year Limited Warranty
10000 Hours Rated Lifespan
40000 Gallons Max Capacity

The OEM Autopilot PPC1 replacement cell is compatible with all Pool Pilot Total Control, Pool Pilot Digital, Soft Touch, and regular Digital Nano chlorine generators. Manufacturer rated for pools up to 40,000 gallons (or 28,000 gallons when used with Digital Nano controls). This 5-blade salt cell is the replacement for older systems previously named Autopilot RC-35/22, SC-36, and AP-36. Cell and unions only

Important: Autopilot recommends that the cell connector cord be replaced when the salt cell is replaced, in order to ensure warranty coverage. See related products below.

Customers who viewed this item also bought

New to Salt Pools?

What you need to know in 60 seconds!

Related Items

Q & A

Q: My cell Has 35/22 on it. Is this the cell that I need?

Asked by: Mike - 5/12/2017
A: Yes, this is the replacement cell for the autopilot rc-35/22.
Was this answer helpful?  2 of 3 Customer(s) found this Answer helpful.
Answer provided by: Nathan (5/13/2017)

Q: Can i replace my RC-28 cell (PPC2) with the RC-35/22 (PPC1)?

Asked by: Ken - 9/10/2017
A: If you have an Autopilot Digital Nano, the PPC1 is the same as the old RC-35/22 (for 22,000 gallons with a Nano control box). The PPC2 is the same as the old RC-28, which is a more powerful cell and is used with the Digital Nano+ control box, so you wouldn't want to downgrade to the PPC1 if you use the PPC2 on a Digital Nano+.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Tony (9/12/2017)

Q: How long is this cell expected to last and how do I know when to replace?

Asked by: Travis - 6/10/2017
A: The lifespan is dependent on use, and on average Autopilot cells probably have a range of 3-5 years. Your control box will typically have errors that indicate it is time to replace your cell, especially if you have confirmed you do have the correct salt level in the water and your cell is clean.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Trevor (6/11/2017)

Q: Hi I keep getting low amps about 1.5 it should be 5 to 4.5 it's clean.when I force a reverse it goes to normal amps then goes but to low I keep the hole filter pump and slat system in a shed. Please help don't know what else to do?

Asked by: Steve - 6/28/2017
A: Just to start, double check that you have enough salt in your water, that you have a fully clean cell, that the water flow is completely filling your cell, and that your cell cord is getting a tight clean connection. If that checks out, give us a call and we can help you further.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (6/29/2017)

Q: The system constantly is saying that required to be clean. I remove the cell multiple times to clean an still see the same message?

Asked by: Be.nny - 3/19/2018
A: Typically with a salt system, if you are still getting any kind of "clean cell" or "low salt message", and you DO actually have a clean cell, good salt level, full water flow, tight cable connections, and basically everything else is right, that is what you will see when the cell itself needs to be replaced.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Steve (3/20/2018)

Q: What causes the cell blades to corrode?

Asked by: Gary - 1/5/2019
A: Just want to clarify what you are seeing. All salt calls will everyday build up with mineral scaling that needs to be cleaned off. If however that's more frequently than once every 6-12 weeks, that's usually an indication of an abnormally high "saturation index", which can get balanced and fixed. If by corrosion you happen to mean you *erosion*, and you're seeing damaged or eaten-away areas of your cell, that's usually a low saturation index, which can also be balanced and prevented. Do a web search of "pool saturation index" for more information.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Nathan (1/5/2019)

Q: What is the replacement cell for cell RC-5, System is Pool Pilot Digital Nano, model 75040

Asked by: Roch Laflamme - 5/12/2020
A: The new equivalent of the RC-5 is this item, the PPC1 cell.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (5/12/2020)