Sale
AutoPilot ChlorSync CS30 Electronic Chlorine Generator
ChlorSync CS30 Saltwater Chlorinator System

AutoPilot ChlorSync CS30 Electronic Chlorine Generator

Part Number: CS30-ECP0312
Availability: In Stock.
14
Choose Options
Add
Remove
Included
Add
Remove
Included
$1,406.05
Save:$158.05(11%)
$1,248.00
0 Add to Cart
Begin Checkout
AutoPilot ChlorSync CS30 Complete Salt Pool System with 3-Year Warranty, for up to 30,000 gallon pools
Power 1.1 lbs/day
Warranty 3 Year
Optional PoolSync Wifi
Max Capacity 30000 Gallons

The AutoPilot ChlorSync with CS30 salt cell is technologically advanced. It controls feature a LCD display, that lets you view current pool water temperature and salt level (and see how much salt to add when needed with PoolSync add-on), chlorine production level, and allows a 24-hour boost cycle. The ChlorSync's Tri-sensor ensures proper flow, temperature, and salinity levels and has patented temperature compensation. ChlorSync cells are the same length and threads as Pentair® IntelliChlor® cells, allowing for easy retrofit installations without requiring plumbing. Optional PoolSync add-on mounts near pool equipment and allows connection to available wifi for remote operation. Its streamlined design allows for simple installation and service. For pools up to 30,000 gallons maximum.


Resources

General FAQ

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.4

Fantastic
I was hesitant when I got this because it seemed newer and it was less expensive than amor I other models - it really paid off. It's working on a very low setting and keeping the pool clear nicely. Seems like it's well made.
Did you find this helpful?  15 of 16 Found Helpful
Reviewed by:  from Coral springs on 5/15/2021
5
Wish it worked. Should be no stars.
I would love to review the item, but it has not worked since installed. Manufacturer referred me to a local pool company for warranty service. He told me they were two weeks out.......THREE WEEKS AGO! Maybe I will update if it ever gets fixed/replaced......
Did you find this helpful?  9 of 18 Found Helpful
Reviewed by:  from TX on 6/15/2021
1
Good quality
Received the system in about 3 days after ordering. Holding it in my hands it seems very well made. I have had it working for about four weeks and I haven't had to do anything yet! It is only running at 50% so it seems to be working as advertised.
Did you find this helpful?  8 of 9 Found Helpful
Reviewed by:  from Coral Springs on 6/16/2021
5
Power supply broke after 1 week. But customer service replaced it within a few days.
The power supply broke after a week of running perfectly. But customer service replaced the unit within a few days and were very helpful. It was reinstalled 2 days ago and is working fine. Just keeping my fingers crossed that it does not occur again.
Did you find this helpful?  6 of 6 Found Helpful
Reviewed by:  from Orrtanna on 6/17/2022
3
Quick set up
This took me about 2 hours to install, and connecting the app and the wifi module took about 5 minutes. Its been working well for the last few days, will update.
Did you find this helpful?  6 of 9 Found Helpful
Reviewed by:  from Arlington, TX on 6/7/2021
5
There are no reviews yet
Questions From Customers

Q: I have a 18 x 48 above ground pool, I really want to convert to salt, but have no idea how to or what I would need for a unit

Asked by: BECKIE - 6/10/2021
A: This ChlorSync CS30 would be more than enough capacity for that pool size. You can reach our experts at 866-766-5243 and we'll be happy to answer any questions you have about adding a salt chlorine generator.
Was this answer helpful?  6 of 7 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (6/10/2021)

Q: Can cell be installed vertically or just horizontal?

Asked by: JR - 6/4/2021
A: Manual says cell must be installed horizontally with 12" straight pipe in front of the cell for proper flow reading.
Was this answer helpful?  3 of 5 Customer(s) found this Answer helpful.
Answer provided by: Jr (7/23/2021)
A: It should work the same whether installed vertically or horizontally.
Was this answer helpful?  3 of 7 Customer(s) found this Answer helpful.
Answer provided by: Dillon (6/4/2021)

Q: Does this work on above ground pools?

Asked by: Keith Allen - 6/8/2021
A: Yes, this can work on above ground pools. Just depending on your plumbing you may need adapters from the hardware store for your pipe size or hoses if you have them.
Was this answer helpful?  3 of 5 Customer(s) found this Answer helpful.
Answer provided by: Dale (6/8/2021)

Q: What is the size of intake and outtake connector?

Asked by: Steven R - 9/15/2021
A: The unions that come with this item are for 2" (inner diameter) pvc pipe
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Discount Salt Pool (9/16/2021)

Q: I’m looking at the CS30-ECP0312 generator system. Just to confirm, that comes with the power supply? Is there anything else I need to make the system work besides obvious salt, etc? Thank you.

Asked by: Bob Helligrass - 3/17/2022
A: Yes that will come with the power supply, cell, and fittings to install the it in the plumbing.
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: John Mark (3/24/2022)

Q: Can the data cable for the PoolSync transmitter be replaced with a longer one? My pool equipment is on the far side of the pool from my house and wouldn't otherwise reach the Wi-Fi signal unless I can run 50' or so of data cable and mount it closer to the house.

Asked by: Ryan - 3/9/2023
A: You might confirm with Autopilot, but I don't see why the cable length would impact it as long as the four-conductor RS-485 wire would need to be hooked up the to the correct spots: 727.823.5642 (https://autopilot.com/wp-content/uploads/LTP0160-PoolSync-Manual-6-22-20.pdf)
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Rick (3/9/2023)

Q: Will any of these salt systems hook to any pump?

Asked by: Don Decamp - 5/28/2021
A: Yes, salt systems are designed to work with your existing pump system.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Aaron (6/1/2021)

Q: Will the replacement cell work with Pentair Intellichlor Power Center?

Asked by: Stan - 7/21/2021
A: No, the ChlorSync cell is made with a 6-pin cable connector, and the Intellichlor uses a 4-pin.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Dave (7/23/2021)

Q: I have a 30 ft round by 4.5 ft average depth pool will the cs30 take care of my pool? If it will what else will I need to buy, other than simple connectors and salt, will I need to buy?

Asked by: Lucian - 3/22/2022
Give our support team a call for more immediate help with this question at 866-766-5243. No Answers have been submitted yet to this Question.

Q: I am currently using 3 inch chlorine tabs in my pool. What would I need to do to convert to the CS 30 salt system?

Asked by: Lucian - 3/22/2022
Give our support team a call for more immediate help with this question at 866-766-5243. No Answers have been submitted yet to this Question.

Chlorine Output:

1.2 lbs /day

Manufacturer Warranty:

3 Years Limited

Manufacturer Max Capacity:

30,000 gallons

Controls:

Digital - LCD Display Screen, LED Indicators

Salinity Range:

2500-3500 ppm

Salinity Test:

Yes - Low, High, Displays ppm

Self-Cleaning:

Yes, Reverse Polarity

Warranty Penalty for Self-Install:

No

Clear Cell:

Yes

Boost Mode:

Yes, 24 hours

Winter Mode:

No

Flow Sensor:

Yes, Independent Flow Switch (as low as 20gpm)

Power Cord Length:

2.5’ 

Cell Cord Length:

14’ 

Rated Amperage (110V/220V):

2A / 1A

Weather / UV-Resistance:

Designed for Outdoor Installation and Operation

The Autopilot ChlorSync controls are permanently integrated into the CS30 salt cell. The small digital display screen shows the chosen percentage chlorine output level, pool salt level, or temperature. The keypad controls allow you to raise and lower the chlorine output enter the menu system, and activate the boost (24 hours) mode. Optional PoolSync units also allow for remote wifi connection, allowing: remote control, viewing salt level and temperature, see how much salt to add when needed, receive notification when the cell needs to be cleaned or alerts should the unit need any attention, and automatic cover connection capability. The ChlorSync controls have automatic model detection, which allows any size ChlorSync cell to work with the single available ChlorSync Power Center.
The Autopilot ChlorSync Electrolytic Cell is a triangular plumbing unit that contains built-in titanium electrode plates, built-in tri-sensor (flow switch, temperature sensor, and salinity sensor), built-in controls, and built-in power supply cord. The salt cell has threaded connections on the inlet and outlet, which allow quick access for service or winter removal (if applicable). The ChlorSync salt cell operates at flow rates as low as 20 gpm.
The Autopilot ChlorSync Power Center is a small sheet-metal box that mounts on the wall (or nearby a post or support) by hanging it on a few keyholes on basic screws that have been secured in the wall. The ChlorSync comes with wall-mount hardware and instruction manual.
Manufacturer 3 Year Warranty for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer's documentation for a full description of warranty terms and conditions.